TJ-60 Softgel Encapsulation Production Line Introduction
Model TJ-60 softgel encapsulation production line is the new model which elaborately designed by our company through combining the technology and characteristics of production.The whole
liine is in accordance with the requirements of GMP.
It is applicable mainly to small batch production and trial manufacture of softgels for labs and scientific
research organizations.
Stainless Steel Vacuum Stirring Tank (Model TJ-40)
The vacuum stirring tank can bear a certain positive and negative pressure.The tank body is consist of
three layers structures between inner layer and middle layer,it is the heating medium layer.It can filled
with hot water or steam and to heat the material inside the tank. Between middle and outside layer,it is
high efficacy thermo material,so it doesn't influence the room temperature.The tank body is made of
SUS304 and completely meets the GMP requirement. The structure is tight, stirring is stable&average
and low noise. There is temperature meter on the tank body and it indicates the temperature inside the
tank.There is vacuum device,add (exhaust) air device,material feeding device,watching glass light,safety
valve and pressure gauge on the tank cover.The operation is safe and dependable.
Technical parameters:
Tech Data:
Inner Effective Capacity:35L
Working Temperature: Room temp.~+95ºC
Stirring Motor Power:90W AC 220V
Stirring Speed: 21.6r/min
Tank Inside Allowed Pressure:-0.09~0.06MPa
External Dimension:Φ480×900mm
Weight:56kg
Softgel Encapsulation Main Machine (Model TJ-60)
We made abbreviared design according to softgel production processing technology,complete function.The entire equipment is compact structure,covers an area of 0.6 m2.The whole equipment can be removed handly,Applicable to varieties of laboratories.
Tech Data:
Main machine
Material Feeding Quantity: 4 X (0- 1.5)mL
Filling Quantity Precision:
<500mg, ±1% ; >500mg, ±0.5%
Capacity:6000 grain/h,500mg of the load.
Power: AC380V 50Hz 1.5kW
External Size: 670×450×750mm
Weight: 200kg
Die Roller
Dimension: Φ64x60mm
Die Roller Pressure: 0.1-0.5MPa
Die Roller Speed: 0-4rpm Stepless Speed Adjust
Stainless Steel Conveyor
Power :220V,0.37KW; Wind pressure:900pa;
Wind quantity:2000 m3/h
Compressed air unit
SMC pressure reducing valve,SMC precision pressure regulator valve,Pressure gauge.
Micro-lubricating System
Oil box,adjustable flow control valve
Gelatin Film Spreading
Speater Box(0.01mm), PID temperature control, Temperature sensor(0. 1ºC)
Control cabinet
OMRON inverter, RKC intelligent temperature controller, Fuji electric button, Schneider electric components,
aerospace grade connectors.
Tumble Dryer(Model TJ-2)
The dryer is manufactured according to the requirements of GMP. It is mainly used for shaping drying of capsules in the production line.
Tech Data:
Size of rotating cage: Φ320×450mm
Rotation rate of rotating cage: 16rpm
Power: AC220V 50Hz 90W
Wound rate of fan: 2x40m3/min
Weight: 75kg
External size: 870×400×750mm
Drying Tray Car
Put the capsules after shape fixing onto the tray on the car, and push them to air drying room for drying and till the finished products got.
Air drying room adopts horizontal air flow layers for air blowing. The room temperature controlled
between 30ºC - 35ºC and humidity controlled below 25%, the capsules put in each tray shall be less than 2 layers.The first 2 hours turn over capsules 4-5 times. To guarantee the capsule's shape and appearance looks better. The air drying time 12- 16 hours can make it completely dry.
Drying car with tray is widely used in soft capsule production, you can dry many kinds of
capsules same time, it is easy to clean thoroughly.
Tray size :530 x360 x55mm
Tray material:Medical Grade PE
Water Circulation Type Vacuum pump(Model TJ-III)
Tech Data:
Power:220V/50H 180W
Flow:60L/min
Capacity:15L
External Dimension:400*280*420(mm)
Air compressor (Model TJ-750)
Tech Data:
Power:220V/50H 750w
Capacity Flow:60L/min
Pressure:7.0 Bar
RPM:1380
External Dimension:560*240*570(mm)
TJ-50
Gelatin spreader box
High precision pump
Gelatin Reactor
Medicine Service Tank
Colloid Mill
Three-pod Centrifuge
Gelatin Recycling System
Our Advantage
20+ Years Experience
Our products are sold all over Europe,North&South America, Sino-East, Asia and pacific area as well as Africa,we establish long term.
Quality service
Company cooperates with research institutes. We strictly control the process of raw materials up to finished product.
24 hour service
Quick and clear response to customers questions. Warm after sale service, we will help to solve the problems in your usage.
High quality
Dedicated to serving customers first, we provide reasonable prices, high quality products.
FAQ
1. What kinds of payment terms can you accept?
The most commonly used payment terms are T/T, L/C, Paypal, Western union, etc.
2. What's your delivery time?
Usually we will arrange the shipment within 15-45 days after confirming the order.
4. How about the packing?
Standard packing , we also accept customized pack.
5. What is the Min Order Quantity?
Different products have different MOQ.
6. How about the validity of quotation?
In normal , the validity can keep a month, but when market changes fast, the validity will be short accordingly.
7. What documents you provide?
Usually, we provide Commerical Invoice, Packing List, Bill of loading, COA , and Origin of certificate. If your markets have any special requirements, let us know.
Our advantage
20+Years experience
24 hour service
Better after sales
High quality
More models
Best price
Spring Ren
For more information,please don't hesitate to contact me.
Audited Supplier 
Technical parameters:
){kind=link}